1 material requirements:
1) used in the construction of each kind of (manufacturers, color, such as different types of different material, aluminum or aluminum) glass plate etc: 150mm size is not less than 4 x 75mm each block,
2) all assembly design with the seal of the auxiliary materials, such as contact with double-sided gaskets, foam great length are not less than 600mm etc,
3) polluting test: each test for 75mm 150mm x to size of stone.
Requirements: for 2.
1 the EMS (EMS) send samples, prevent loss of sample, and, at the same time, should pay attention to in test sample packing is good to avoid damage. Do not use in direct stick adhesive label on base material, preventing human pollution.
2) for material must be used on the practical project, in order to ensure the authenticity of the test results and the effectiveness of this company (only, and for future to sample file for query).
3 filling requirements:
According to fill in the form and submit information to determine the content of examination, and fill in again after submitting forms. Avoid multiple submission, causing a project appear multiple passwords and application number. After the application submitted (such as that of the form is incorrect, but in printed form directly apply again, need not to revise, stay by us after receipt enter background material modification.
When the form, please indicate the type and use glue injector (such as aluminum, what use rubber adhesive surfaces which side is complete, etc), and detailed contact address, telephone, fax or email to the report to customer on time. Note: the application form must be submitted after printing attached material within the company attached to me.
Test if you have special request, please specify. (such as: the need for such preliminary report; if insufficient, don't be preliminary report).
4 test procedure:
1) in our laboratory experiments on materials, received will promptly unpacking and acceptance. Customer should according to "application" and "password" online inquiry test results.
2) test materials are divided into two groups: one group of the accelerated aging test, a group of standard test according to normal. Among the accelerated aging test lasted 12 days (i.e. initial report of test results is in 12 days after receiving material to issue), The rest of the test cycle for 35.
5 all agents, distributors, engineering construction, etc.
Must strictly according to relevant specification, with glue in glue should be first preliminary test by backing with adhesive (method is: will base on above after clean glue, glue shovel will blow into 3mm thick, 2-2-3 days, to fully cured gel, rubber and the bonding material), and in construction must be carried out with the batch test and rubber cutting experiment, to ensure safety and find out the problem.
1) used in the construction of each kind of (manufacturers, color, such as different types of different material, aluminum or aluminum) glass plate etc: 150mm size is not less than 4 x 75mm each block,
2) all assembly design with the seal of the auxiliary materials, such as contact with double-sided gaskets, foam great length are not less than 600mm etc,
3) polluting test: each test for 75mm 150mm x to size of stone.
Requirements: for 2.
1 the EMS (EMS) send samples, prevent loss of sample, and, at the same time, should pay attention to in test sample packing is good to avoid damage. Do not use in direct stick adhesive label on base material, preventing human pollution.
2) for material must be used on the practical project, in order to ensure the authenticity of the test results and the effectiveness of this company (only, and for future to sample file for query).
3 filling requirements:
According to fill in the form and submit information to determine the content of examination, and fill in again after submitting forms. Avoid multiple submission, causing a project appear multiple passwords and application number. After the application submitted (such as that of the form is incorrect, but in printed form directly apply again, need not to revise, stay by us after receipt enter background material modification.
When the form, please indicate the type and use glue injector (such as aluminum, what use rubber adhesive surfaces which side is complete, etc), and detailed contact address, telephone, fax or email to the report to customer on time. Note: the application form must be submitted after printing attached material within the company attached to me.
Test if you have special request, please specify. (such as: the need for such preliminary report; if insufficient, don't be preliminary report).
4 test procedure:
1) in our laboratory experiments on materials, received will promptly unpacking and acceptance. Customer should according to "application" and "password" online inquiry test results.
2) test materials are divided into two groups: one group of the accelerated aging test, a group of standard test according to normal. Among the accelerated aging test lasted 12 days (i.e. initial report of test results is in 12 days after receiving material to issue), The rest of the test cycle for 35.
5 all agents, distributors, engineering construction, etc.
Must strictly according to relevant specification, with glue in glue should be first preliminary test by backing with adhesive (method is: will base on above after clean glue, glue shovel will blow into 3mm thick, 2-2-3 days, to fully cured gel, rubber and the bonding material), and in construction must be carried out with the batch test and rubber cutting experiment, to ensure safety and find out the problem.